Pelikan Produce Perfection...Again!

Upcoming wonders from Jakub, Jaroslav and team

I teased on my "new toys" page that I had received a bunch of wonderful new puzzles from the incredible Pelikan team and that I was working my way through them as fast as my little brain would cope. This was going to be a fun challenge for me whilst the present wife (she's doing ok for a first wife) was up in Edinburgh all week visiting the out-laws. Unfortunately I still had to work but part of it was at a virtual medical conference for a couple of days which did give me a few breaks to play in. I did try to play during the talks but I am not a woman and thus, cannot multitask. Yesterday, I managed to complete the final challenge (with a little cheating) and am ready to produce my reviews for you.

Ladybug

Ladybug by Pelikan - front and back views. It is adorable!

Pelikan have begun producing their own designs recently and are focussing on animals/insects. They are all absolutely gorgeous and have a real character to them. I classify them as "interlocking" puzzles but not burrs - I am not an expert, but I am sure that they count as Kumiki (maybe Frank will correct me if I'm wrong?) The Ladybug is a good bit larger than the previous releases - it stands out vibrantly in the living room (where my collection seems to be expanding much to the annoyance of Mrs S).  It is made from Wenge  and an incredibly red Padauk and is just plain cute. The last one, Snail, was slightly more complex than to dismantle than this one but it is still fun. To make it more of a challenge, I immediately scrambled the pieces and made a pile before trying to reassemble. It is still not very difficult but did take me a few minutes to work out the order and how to interlock them properly. This is a must have just for its' sheer beauty!

A pile o' pieces!

Dino

Dino by Christoph Lohe -Wenge and Acacia

Walnut and Wenge

There will be 2 versions of the Dino puzzle designed by Christoph Lohe. Chris is one of my favourite puzzle designers - he has a huge knack of creating puzzles that have a real quirky challenge to them. they are just the right difficulty level and are genuinely fun. This one is rather different to his usual - it is a fun cute shape and has less pieces than many of his other challenges. I think it is adorable.

The aim, obviously is to dismantle it and reassemble and this is definitely possible without using Burrtools. I had to feed back to Jakub that there was a rotational shortcut in the design that left the puzzle as a level 5 disassembly (Jakub hopes that you will not mind this). Personally I think it adds an extra dimension to the puzzle - first solve it with the rotation and then seek out the purely linear solution. The linear solution has a level 20.7.3.3 and one of the moves took me a very long time to find. Reassembly is possible without Burrtools and for the truly gifted amongst you then I suggest that you disassemble with the shortcut and then make the linear reassembly the true challenge. I think that will keep most of you going for a while.

Dino dismembered!

Shutout

Shutout by Osanori Yamamoto

This fabulous puzzle by Osanori Yamamoto has already been reviewed by me after I bought it direct from the master himself. In fact Allard has just reviewed it as well (summary - he loved it!) This fabulous challenge won a "Top 10 vote getter" prize in the 2022 IPP Design competition and I am so glad that it is being produced in greater numbers than Osanori-san can manage - everyone should get a chance to try this puzzle. It will be available in Wenge and Padauk as well as Wenge and Maple.

The aim is to assemble 6 identical tetrominoes inside the cubic box in such a way that all the gaps are filled. It has a nice "almost there" solution but the true solution requires several lovely Aha! moments. It is actually quite difficult - one of the great puzzlers out there, Naoaki Takashima, had shown it off as one of his puzzles of 2022 (alongside 3 other very serious puzzlers). When Naoaki-san had showed it off he had announced that he had placed a few of the pieces inside and couldn't even work out how he had done it and couldn't remove them. If a puzzler as good as this struggled then it has to be a significant challenge. Even having solved the original version, I struggled to solve it again after a gap of a few months - I remembered the tricks but still couldn't put all of them together into one solution without a struggle. 

No! This picture is not helpful!

It is beautifully made as you would expect from Pelikan and wonderfully tactile. I have to say that this is one of those "essential purchases" from this Pelikan release.

Slider 2

Slider 2 by Osanori Yamamoto

Osanori-san has a second puzzle in this release and it is a significant challenge. I had bought and reviewed the Gem from his in April and absolutely adored the challenge (in fact Osanori and told me that Gem was one of his favourite puzzles). The Slider 2 is like the Gem but on steroids - it is a significantly difficult challenge and luckily has been sent out as a disassembly challenge rather than an assembly one. They share in common the fact that there are plate burrs which ned to be fitted into a cubic frame. Made more complex by the fact that the plates are not flat and protrude out into the z axis. Gem has 3 plates and Slider 2 ups the ante by having 4 plates. It has been beautifully made with Mahogany and Wenge and the finish ensures that everything slides smoothly. Some of the moves are very well hidden. and there are several blind ends and circular routes possible during the exploration. I got stuck for several days with the plates extended out of the frame quite a long way but just could not find a space where it would extend enough to release. After 4 days of trying, I found my missing move with a great shout and removed the first piece. After that it is easy to remove the rest. I then suggest that you leave the pieces for a while before trying to put it back together - it is VERY difficult if you have mixed the pieces up. I failed and had to create a Burrtools file which told me that the disassembly level was 21.2.1.2 

A fabulous challenge

This was a huge challenge for me due to getting stuck so close to the end. Reassembly required Burrtools but after that it was a fun one to memorise and assemble from memory.

Nebelung

Nebelung by Alfons Eyckmans

Rear view

I have a bit of a weakness for caged burrs - there is something about how the addition of a cage around a (usually) 6 piece burr makes it so much more difficult (I wrote about one just a few weeks ago). Alfons is a master of puzzle design and he takes an idea and runs with it until he has created an ultimate version of the genre. I have bought many of the interlocking cubes from him as well as from Jakub over the years and they are just amazing. This time Alfons has taken the caged burr and made it more interesting and more difficult - he has taken a 9 piece burr and placed it in a rather complex cage and created a level 18.1.1.2.2 puzzle which requires some proper exploring and clever moves to solve. Pelikan have made it using a lovely contrasting Wenge and vibrant Padauk (it really is as bright as the picture shows). 

Straight away there are some lovely moves to explore and not too many blind endings to get lost in. I made some fast progress initially before getting stuck for a day. The cage here seems to act to hold the pieces in place but still allows you to see inside and try and plan your moves. It took me some time to find a rather delicious move that I could not have found by accident - I needed to look and plan to get my special "squish" move. This then opened up more pathways and progress seemed to be being made before I was stuck again. I got stuck here for a few more days and, again, had to look and plan. Suddenly after another Aha! moment I had opened up a section which allowed pieces to be removed from the puzzle. It remained remarkably stable until I had removed almost all 9 burrsticks. I did have to resort to Burrtools for the early part of the reassembly but once I had the first 4 pieces inside the frame, I was able to reassemble it from scratch. This was a framed burr made beautifully at just the right difficulty level.

Just look at that wonderful craftsmanship!

Ode to the Bevel aka Fermat for Friends

Ode to the bevel by Dr Volker Latussek

Yes, we have another of Dr Latussek's clever packing puzzles! I was contacted by Volker when he heard that I had received my review copy. I was very surprised that he was almost apologetic about it! He said:

"I had planned to pack five identical triangles into my usual box. I had wished that the triangles were beveled, preferably the tips were trimmed. I made a virtue of this necessity and for the first time designed a puzzle whose solution is only possible with a bevel. Nevertheless, Pelikan had to keep the usual small tolerances. Many thanks for that. The puzzle is an ode to the bevel. I beg the indulgence of the experts among Pelikan's customers, ODE TO THE BEVEL is, like my CASINO, a puzzle for the coffee table."

Volker had designed something very clever but thought that the puzzle may not have the purity and difficulty of his previous puzzles that Jakub and Jaroslav's customers had come to expect. He wanted it to be a family puzzle that is suitable to display on a coffee table for all to play with rather than go in a collection. I have to say that he has NOTHING to apologise for! Yes, this puzzle is not as pure as some others and indeed, it is not quite as difficult as as the others but that does not detract from it at all. I think that this puzzle is FABULOUS! It has been beautifully made from Pink Oak and a vibrant yellow Garapa. 

There are a few interesting possibilities when assembling shapes outside the box. The pieces seem to fit into the box quite easily up to getting the fourth one in and then it gets pretty blocked up and even with my small fingers, I struggled to move them around inside as they blocked each other. This puzzle requires a bit of thought about how the shapes can interact with the box and a bit of planning before you get a lovely Aha! moment and suddenly the final piece sits inside. I won't show the solved puzzle here. As with all of Volker's puzzles, he has a very specific transport assembly which in itself is a bit fiddly to get done - I don't envy the Pelikan team putting them all together!

Tetra Flop

Tetra Flop by Dr Latussek

8 Tetrominoes to fit

Another masterpiece by Volker! This packing puzzle is gorgeous and chunky. The substantial box is Elm and the vibrant pieces are Bubinga. It consists of all eight possible Tetrominoes which need to be formed into a 4x4x2 cuboid but done through a 1½x4 voxel hole in the top. There is a small hole in the bottom which is not quite big enough to let you put fingers through to move the pieces around inside. It quickly becomes apparent that the size and position of this hole is perfect to allow rotations of the pieces in certain directions inside the box. This is obviously going to be a challenging puzzle.

Having removed the pieces for my photo, I wanted to put them back in the same way so that I could carry it in my work bag for a few days. Sigh! I couldn't even find the way to replace them in the transport position which had the 4x1x1 stick just lying on top. This might just prove impossible for me. Volker had also commented on this to me:

"sparked by a call from Oskar van Deventer to suggest new cages for the SOMA CUBE. Although I'd already worked on a similar idea a while ago, I gave it another go, and in fact this time turned out to be more productive than back then and I had a lot of fun playing with the new ideas and especially working with Oskar. (Thanks Oskar!)... 

While I can't definitively say that there isn't one, I have only managed to find one dirty design with an extra opening on the back, which might be a clue to the (unique) solution. For me, the solution contains such wonderful rotations that I decided I had to publish TETRA FLOP despite my reservations."

Yet again he seems to be apologising for a "less than pure" puzzle! The fact that the box needed a hole to facilitate some of the rotations to his mind makes the puzzle less worthy and again, I have to disagree. The purity of the puzzle does not in any way detract from the wonderful sequences of moves that are required to solve it! Again, this puzzle is a masterpiece and I just do not understand how his mind works to find these designs. I initially tried making the required shapes outside the box and then looking to see whether I could do so through the limited opening. Each shape I found has to be looked at in 8 different orientations. I am not very good at Soma type assemblies and having found 4 cuboids and 32 different failed attempts at inserting them into the box, I went to Burrtools to see how many possible assemblies there might be and was horrified to see that there are 695! Aargh!

At this point I had asked Jakub for some help and the solution file was sent to me. I was very careful to glance through squinted eyes and only saw the positions of 3 of the pieces and used this as my starting point. Another 3 days and I had found a few assemblies that might be promising but just could not get them in the box. Back to Burrtools - I constrained the solver to have those 3 pieces in the positions that I had seen and now I had only 60 possibilities and also did not need to bother with rotation of the assembled cuboid. The fourth of the assemblies that Burrtools had found did look promising and I set to. Oh boy! There are a LOT of rotations in this and they must be done in the right order and right position. Volker is absolutely right, this has some wonderful rotations in it which are a joy to explore.

This will not help you in any way!

This is a seriously difficult puzzle! It is not for the faint hearted and only the very best (or luckiest) of you will manage to solve this without help. If I had not been shown the position of 3 pieces then I think I would still be at it for weeks if not years. This is perfect for the puzzle geniuses or the suckers for punishment! Thank you Volker!

What do I advise you to definitely buy? Shutout is an essential for puzzlers - it won a prize for a very good reason. Ode to the Bevel is yet another fabulous Latussek puzzle - being slightly easier than its' predecessors does not detract from the joy I got in its' solution. Ladybug is gorgeous, fun and will look lovely on display. After that, it depends on whether burrs are your thing or incredibly difficult packing puzzles. Personally, I think you should buy them all!