Smacking Moles Is Fun But...

After A While I Had To Use Some Pliers!

Smack-N Moles by Stickman

In 2023, Chinny collaborated with Robert Yarger to make a fabulous exchange puzzle, the "Smack-N Moles" puzzle box. Chinny gave it away to about 100 people in IPP40 at which I was not present. Luckily for a whole bunch of us who couldn't make it, there were more available direct from Stickman's website and I eagerly jumped at the chance to buy. My copy arrived in October of 2023 and has been in my second (or maybe third or fourth 😱) pile of puzzles to be solved. This time, my pile in the conservatory at the back of the house. I tend to sit there in the mornings at weekends and when off work and play with puzzles in the south-facing warmth. Sometimes I fall asleep, sometimes I play...I seldom seem to solve anything! The Smack-N Moles has been in that pile, played with weekly for about 18 months! I was beginning to get desperate. I felt a little bad for my failure but, in my defence, remember that I really seldom do puzzle boxes and don't really have a repertoire of the types of moves that they often need. Also in my defence, I note that Allard received his at the IPP in August and the write up was only published in December. Now, Allard is a huge Stickman aficionado with one of the few complete collections in the world and I am absolutely certain that despite receiving a lot of puzzles at the exchange, he will have made a beeline straight for this one and if it took him a few months then I can feel OK about taking 18 months!

This is a nice diminutive little box at 3.5x3x2.5" in size and my copy is made from Walnut. The aim is to open the box and release the moles. These cute little critters are engraved on the top of some Maple dowels that appear to be locking the sliding lid. Poking at a mole makes one or more of the others pop up when that one sinks down. You are given a tethered hammer to Smack/whack the moles but I doubt very many people are going to solve it by using the hammer that way. The hammer is tied onto the box by a loop of wire that is the perfect length to prevent the hammer being removed. Initially all you can do is poke at the moles and see whether there is a sequence of presses that will allow all the moles to be sunk below the surface of the lid.

I am slightly ashamed to say that I pushed and poked and even grabbed and pulled at the various moles for quite a long time trying to work out the sequence to release the lid. When I say a long time, I mean months! BLUSH! Remember that I am not terribly bright - it says so all over this website, so it must be true. At some point, I can't remember when, I managed to find a tool to be used but absolutely nowhere to use it so I carried on poking at moles and achieving nothing. I grew desperate - it's really quite frustrating to have a tool and nowhere to put it! I ended up shaking the box gently which also did nothing until I shook it in the right direction.Suddenly something happened and I was able to notice another "feature". After playing with said "feature" for a few minutes, I managed to manipulate it to get me a hole. At last! I had somewhere to put my tool. Now, now, keep your minds out of the gutter (especially you, Steve). I stuck my tool in the hole and wiggled it about and even rotated it for a while. Nothing happened, but it was very satisfying. Eventually, sticking your tool in a hole and swivelling it starts to get boring when there is no response - maybe it is my technique?

Here I stayed for over a year! On almost a weekly basis for a very long time I played with my tool to no good effect. I was getting to the point of maybe asking Shane for a clue when I had one of those rare thoughts© - maybe I should try this thing...   Nope, that didn't work and I stopped trying for another few months. 

Last week after continuing to think© I reached the conclusion that I had tried everything possible and something was stuck. I decided it was time for the big guns. Well actually a medium pair of pliers. Yes, I know, no external tools allowed but I had come to the conclusion that the next part of the mechanism was stuck solid on my copy and I had nothing much to lose. Needless to say, When you use brute force and pliers, things tend to loosen. Once my heart rate had settled a little, I found that I had a new tool and also a new set of things to try. Exploring with this tool revealed something very interesting and a possible way to make the two tools I now had interact with each other.

After a few moves something interesting was happening to all the moles and before long I had my wonderful long-awaited Aha! moment! Such a relief.

Moles are free and the box is open

I was now free to look at the mechanism properly and it is really quite clever. It really isms terribly difficult but the movement of the moles is designed to make you think all the wrong things and lead you in the wrong direction. 

The reassembly is significantly fiddly but knowing how it works means that a bit of perseverance is required. I then had a look at the piece that needed pliers and realised that some lacquer had gotten onto it and effectively fused it in place. There was absolutely no way that I was ever going to shift that without using my tool. This means that you can stop berating me! 

I can finally put another puzzle away and this will join my small, but well-loved, Stickman collection. I have missed out on the subsequent releases but I am ever-hopeful that Robert will let me buy another one sometime. 🤞🏻🤞🏻🤞🏻

---

A little underwhelming?

Finally, with a little encouragement (but no real clues from Goetz) I can finally say that I have completed the Ages sequential discovery burr having found the compartment that contains the piece of Lightning Ridge opal. The opening of that compartment requires construction of a very clever tool and using it to manipulate the cover in a counter-intuitive way. It is classic Brian! Thank you my friend. I can finally put it away after so many years!

In the right light the pearlescent opal colours do shine